Advanced LSI Calculator for Swimming Pools
Current Readings
Dosing Instructions
Enter your current readings and click "Calculate LSI" to see dosing instructions.
Recommended Chemicals:
- pH Increaser: Soda Ash (Sodium Carbonate)
- pH Decreaser: Muriatic Acid
- Alkalinity Increaser: Baking Soda (Sodium Bicarbonate)
- Calcium Hardness Increaser: Calcium Chloride
- Chlorine Increaser: Liquid Chlorine (Sodium Hypochlorite)
Note: Always follow manufacturer's instructions and add chemicals to the pool water separately. Test water after each adjustment.
Chlorine Recommendation:
Based on your current readings and pool volume, we'll calculate the amount of chlorine to add.
Important Instructions and Warnings
Important Instructions for Adding Chemicals:
- Always add chemicals to water, never water to chemicals.
- Add chemicals one at a time, allowing each to circulate before adding the next.
- Run the pool pump while adding chemicals to ensure proper distribution.
- Wait at least 4-6 hours between adding different chemicals.
- Retest the water after each chemical addition and adjustment.
Warnings:
- Wear appropriate personal protective equipment (PPE) such as gloves and safety goggles.
- Keep all pool chemicals out of reach of children and pets.
- Never mix different pool chemicals together, as this can create dangerous reactions.
- Follow all manufacturer's instructions and safety guidelines for each chemical product.
- In case of accidental ingestion or exposure, contact Poison Control immediately.
Note: If you're unsure about handling pool chemicals, consult a professional pool service.
Recommended Chemical Levels
| Parameter | Recommended Range |
|---|---|
| pH | 7.2 - 7.8 |
| Total Alkalinity | 80 - 120 ppm |
| Calcium Hardness | 200 - 400 ppm |
| Total Dissolved Solids (TDS) | < 2000 ppm |
| Free Chlorine | 1 - 3 ppm |
| Cyanuric Acid (Stabilizer) | 30 - 50 ppm |